1. Matter aur chhote particles
- Matter ka mass hota hai aur woh space occupy karta hai. Air, paani aur namak matter hain. Mass ka SI unit kilogram (kg), volume ka cubic metre (m³) hai (p1).
- Namak paani mein milne par gayab ya nasht nahin hota: uske particles paani mein phail jaate hain. Chapter ka model particles ke beech space aur unke bahut chhote hone ko samjhata hai (pp1-2).
Model ki tasveer actual particle size nahin dikhati. Dilution ka matlab naye chhote molecules banana nahin.
2. Motion, diffusion aur attraction
- Particles lagatar move karte hain. Temperature badhne par unki kinetic energy badhti hai. Do tarah ke particles ka apne aap intermix hona diffusion hai; heating se yeh tez ho sakta hai (p3).
- Particles ek-doosre ko attract karte hain. Is attraction ki strength alag substances mein alag hoti hai (p3).
Smell ka anubhav aur perfume vapour ke material particles alag baatein hain. Diffusion mein vapour particles hawa mein phailte hain.
3. Solid, liquid aur gas
- Solid ka shape aur volume definite, compressibility bahut kam. Liquid ka volume definite par shape container ke hisab se; woh flow karta hai. Gas available container ko bhar deti hai aur kaafi compress ho sakti hai (pp4-5).
- Gas particles ki container ki walls se collisions pressure banati hain. Particle model mein solids paas/ordered, liquids mein particles slide kar sakte aur gases mein bahut space hota hai (p5).
- Rubber band stretch hone par bhi solid hai; namak ka har crystal solid hai, chahe poora dher bartan ka shape le. Sponge ke pores se air nikalne par woh dab sakta hai (p4).
Fixed shape ka matlab kabhi bhi deform na hona nahin. Diagrams simplified models hain, scale par nahin.
4. Temperature aur latent heat
- Atmospheric pressure par ice lagbhag 0 °C par melt aur water 100 °C par boil karta hai. Melting solid se liquid, freezing ulta; boiling poore liquid mein hoti hai (pp6-7).
- Melting ke dauran heat milne par bhi temperature constant reh sakta hai: energy state badalne mein lagti hai. Latent heat of fusion: melting point par 1 kg solid ko liquid banane ke liye energy. Vaporisation ke liye boiling point par 1 kg liquid ko gas banane ki energy (pp7,11).
- Same temperature par steam mein liquid water ke mukable phase-change ki extra energy hoti hai. Condense hone par steam yeh energy de sakti hai (p7).
Melting/boiling point pressure par depend karte hain. Burns ka comparison concept hai, koi experiment nahin.
5. Sublimation, deposition aur pressure
- Solid se seedha gas, beech mein liquid nahin: sublimation. Gas se seedha solid: deposition. Dono ko ek hi direction ka naam na dein (pp8,11).
- Temperature kam aur pressure badhakar suitable conditions mein gases liquefy ki ja sakti hain. Dry ice solid CO₂ hai, jo 1 atmosphere par seedha gas mein badalta hai (p8).
Yahan sirf concept hai. Chemical heating, dry-ice handling aur pressurised-cylinder activities ke steps nahin diye.
6. Evaporation aur cooling
- Evaporation liquid ki surface par hota hai aur boiling point se neeche bhi ho sakta hai. Surface ke higher-energy particles attraction se nikal kar vapour ban jaate hain (p9).
- Baaki conditions same hon: surface area, temperature ya wind speed badhne par evaporation tez; humidity badhne par dheema. Humidity hawa mein water vapour se judi hai (p9).
- Evaporation ke liye surroundings se energy milti hai, isliye cooling hoti hai. Cotton sweat absorb karke use evaporation ke liye expose karta hai. Cold glass ke bahar droplets hawa ke vapour ke condense hone se hain, glass leak hone se nahin (pp9-10).
Boiling bulk phenomenon hai, evaporation surface phenomenon. Dono ko ek jaisa na likhen.
7. Units, conversion aur page ki seema
- Kelvin temperature ka SI unit hai: K, degree sign nahin. Exact 0 °C = 273.15 K. Is edition ke school calculations mein 273 use hota hai: K ≈ °C + 273; °C ≈ K - 273 (p7 footnote).
- Textbook rounding se 25 °C ≈ 298 K; 293 K ≈ 20 °C. Mass kg, weight newton (N), volume m³, density kg/m³ aur pressure pascal (Pa) hain (p12).
- Yeh archived own 2020-21 chapter ke notes hain. Brief end Q1-8 neeche hain; Q9 diagram, full in-text/activity solutions, group model aur detailed plasma/BEC box omitted.
Official chapter URL ab alag Exploration text deta hai; old prelims list ko usse jodkar current syllabus claim nahin kiya gaya.
1. पदार्थ और छोटे कण
- पदार्थ का द्रव्यमान होता है और वह स्थान घेरता है। हवा, पानी और नमक पदार्थ हैं। द्रव्यमान का SI मात्रक किलोग्राम (kg), आयतन का घन मीटर (m³) है (p1)।
- नमक पानी में घुलकर नष्ट नहीं होता; उसके कण पानी में फैल जाते हैं। अध्याय का मॉडल कणों के बीच रिक्त स्थान और उनके बहुत छोटे आकार को समझाता है (pp1-2)।
चित्र वास्तविक कणों के आकार नहीं दिखाता। तनुकरण से नए छोटे अणु नहीं बनते।
2. गति, विसरण और आकर्षण
- कण लगातार गतिशील हैं। तापमान बढ़ने पर उनकी गतिज ऊर्जा बढ़ती है। दो प्रकार के कणों का अपने आप मिलना विसरण है; गरम करने पर यह तेज हो सकता है (p3)।
- कण एक-दूसरे को आकर्षित करते हैं। इस बल की प्रबलता अलग पदार्थों में अलग होती है (p3)।
गंध का अनुभव और इत्र की वाष्प के भौतिक कण अलग बातें हैं। विसरण में वाष्प के कण हवा में फैलते हैं।
3. ठोस, द्रव और गैस
- ठोस का निश्चित आकार और आयतन है; संपीड्यता बहुत कम है। द्रव का आयतन निश्चित, आकार बर्तन के अनुसार और बहने का गुण है। गैस उपलब्ध बर्तन को भरती है और अधिक संपीडित हो सकती है (pp4-5)।
- गैस के कणों की दीवारों से टक्कर दबाव पैदा करती है। मॉडल में ठोस के कण पास और व्यवस्थित हैं, द्रव में खिसक सकते हैं और गैस में उनके बीच बहुत स्थान है (p5)।
- खींचा गया रबड़ बैंड ठोस ही है। नमक का हर क्रिस्टल ठोस है, भले ढेर बर्तन का आकार ले। स्पंज के छिद्रों से हवा निकलने पर वह दबता है (p4)।
निश्चित आकार का अर्थ यह नहीं कि बल से कभी विकृति नहीं होगी। चित्र सरल मॉडल हैं, वास्तविक पैमाने पर नहीं।
4. तापमान और गुप्त ऊष्मा
- वायुमंडलीय दबाव पर बर्फ लगभग 0 °C पर पिघलती और पानी 100 °C पर उबलता है। गलन में ठोस द्रव बनता है; जमना विपरीत प्रक्रिया है। क्वथन पूरे द्रव में होता है (pp6-7)।
- गलन के दौरान ऊष्मा मिलते हुए भी तापमान स्थिर रह सकता है: ऊर्जा अवस्था बदलने में लगती है। गलन की गुप्त ऊष्मा गलनांक पर 1 kg ठोस को द्रव में बदलने की ऊर्जा है। वाष्पीकरण की गुप्त ऊष्मा क्वथनांक पर 1 kg द्रव को गैस बनाने की ऊर्जा है (pp7,11)।
- समान तापमान पर भाप में द्रव पानी की तुलना में अवस्था-परिवर्तन की अतिरिक्त ऊर्जा होती है। संघनन पर भाप यह ऊर्जा दे सकती है (p7)।
गलनांक और क्वथनांक दबाव पर निर्भर हैं। जलने का उदाहरण समझने के लिए है, प्रयोग करने के लिए नहीं।
5. ऊर्ध्वपातन, निक्षेपण और दबाव
- ठोस का बिना द्रव बने सीधे गैस में बदलना ऊर्ध्वपातन है। गैस का सीधे ठोस बनना निक्षेपण है। दोनों दिशाओं को एक नाम न दें (pp8,11)।
- उचित दशाओं में तापमान घटाकर और दबाव बढ़ाकर गैस को द्रव बनाया जा सकता है। शुष्क बर्फ ठोस CO₂ है, जो 1 atmosphere पर सीधे गैस बनती है (p8)।
यह केवल अवधारणा है। रसायन गरम करने, शुष्क बर्फ छूने या दबाव वाले सिलिंडर चलाने के निर्देश नहीं हैं।
6. वाष्पीकरण और शीतलन
- वाष्पीकरण द्रव की सतह पर होता है और क्वथनांक से नीचे भी हो सकता है। सतह के अधिक ऊर्जा वाले कण आकर्षण से मुक्त होकर वाष्प बनते हैं (p9)।
- अन्य दशाएँ समान हों तो सतह का क्षेत्रफल, तापमान या हवा की गति बढ़ने से दर बढ़ती है; आर्द्रता बढ़ने से घटती है। आर्द्रता हवा में जलवाष्प से जुड़ी है (p9)।
- वाष्पीकरण के लिए परिवेश से ऊर्जा मिलने के कारण ठंडक होती है। सूती कपड़ा पसीना सोखकर उसे वाष्पीकरण के लिए फैलाता है। ठंडे गिलास के बाहर बूँदें हवा की जलवाष्प के संघनन से बनती हैं, रिसाव से नहीं (pp9-10)।
क्वथन पूरे द्रव में, वाष्पीकरण सतह पर होता है। दोनों में अंतर रखें।
7. मात्रक, रूपांतरण और सीमा
- तापमान का SI मात्रक केल्विन है: K, उसके साथ डिग्री चिह्न नहीं। ठीक 0 °C = 273.15 K है। इस पुस्तक की गणना में 273 लिया है: K ≈ °C + 273; °C ≈ K - 273 (p7 की टिप्पणी)।
- पुस्तक के पूर्णांक नियम से 25 °C ≈ 298 K और 293 K ≈ 20 °C। द्रव्यमान kg, भार न्यूटन (N), आयतन m³, घनत्व kg/m³ और दबाव पास्कल (Pa) हैं (p12)।
- नोट्स संग्रहित 2020-21 अध्याय पर हैं। नीचे अंतिम अभ्यास Q1-8 के संक्षिप्त उत्तर हैं। Q9 चित्र, सभी बीच के प्रश्न/प्रयोग, समूह मॉडल और विस्तृत प्लाज्मा/BEC बॉक्स शामिल नहीं हैं।
आधिकारिक अध्याय के पते पर अब अलग Exploration पाठ है। पुरानी विषय-सूची से उसे मिलाकर वर्तमान पाठ्यक्रम का दावा नहीं किया है।
1. Matter and small particles
- Matter has mass and occupies space. Air, water and salt are matter. The SI unit of mass is the kilogram (kg); the SI unit of volume is the cubic metre (m³) (p1).
- Salt does not vanish or get destroyed when it dissolves. Its particles spread through the water. The chapter uses a particle model to explain spaces between particles and their very small size (pp1-2).
The drawings are not actual-size views. Dilution does not mean that new, smaller molecules are made.
2. Motion, diffusion and attraction
- Particles keep moving. Their kinetic energy increases as temperature rises. Diffusion is the intermixing of two types of particles on their own; heating can make it faster (p3).
- Particles attract one another. The strength of this attraction differs between substances (p3).
The experience of a smell is different from the material particles of perfume vapour. Those particles spread through air.
3. Solids, liquids and gases
- A solid has a definite shape and volume and very low compressibility. A liquid has a definite volume but takes the shape of its container and flows. A gas fills the available container and is highly compressible (pp4-5).
- Gas pressure comes from particle collisions with the container walls. In the model, solid particles are close and ordered, liquid particles can slide past one another, and gas particles have large spaces between them (p5).
- A stretched rubber band is still a solid. Individual salt crystals remain solid even if the pile takes a container shape. A sponge compresses as air leaves its pores (p4).
Definite shape does not mean that force can never deform a solid. Particle pictures are simplified and not to scale.
4. Temperature and latent heat
- At atmospheric pressure, ice melts at about 0 °C and water boils at 100 °C. Melting changes a solid to a liquid; freezing reverses it. Boiling occurs throughout the liquid (pp6-7).
- During melting, added heat may not raise the temperature: energy is used in changing state. Latent heat of fusion is the energy needed to turn 1 kg of a solid into liquid at its melting point. Latent heat of vaporisation changes 1 kg of liquid into gas at its boiling point (pp7,11).
- Steam contains additional phase-change energy compared with liquid water at the same temperature. It can release this energy when it condenses (p7).
Melting and boiling points depend on pressure. The burn comparison is an explanation, not an experiment to try.
5. Sublimation, deposition and pressure
- Sublimation changes a solid directly to gas without a liquid stage. Deposition changes gas directly to solid. Keep the two directions distinct (pp8,11).
- Under suitable conditions, lowering temperature and increasing pressure can liquefy gases. Dry ice is solid CO₂; at 1 atmosphere it changes directly to gas (p8).
These are concepts only. Chemical heating, dry-ice handling and pressure-cylinder operating instructions are not provided.
6. Evaporation and cooling
- Evaporation takes place at a liquid surface and can occur below its boiling point. Higher-energy particles at the surface escape the attractions holding them in the liquid (p9).
- With other conditions held constant, a larger exposed area, higher temperature or stronger wind increases evaporation. Higher humidity reduces it. Humidity concerns water vapour in air (p9).
- Evaporation draws energy from the surroundings and causes cooling. Cotton absorbs sweat and exposes it to evaporation. Droplets outside a cold glass come from water vapour in the air condensing, not water leaking through the glass (pp9-10).
Boiling is a bulk process; evaporation is a surface process. Do not use the terms as if they were identical.
7. Units, conversions and scope
- The SI temperature unit is the kelvin, written K without a degree sign. Exactly 0 °C = 273.15 K. The textbook rounds this to 273 for school calculations: K ≈ °C + 273; °C ≈ K - 273 (p7 footnote).
- Using that rounded convention, 25 °C ≈ 298 K and 293 K ≈ 20 °C. Mass uses kg, weight newtons (N), volume m³, density kg/m³ and pressure pascals (Pa) (p12).
- These notes use the archived 2020-21 chapter. Brief end-exercise Q1-8 answers follow in Hinglish. Q9 diagram labelling, full in-text/activity solutions, the group model and the detailed plasma/BEC box are omitted.
The official chapter URL now returns a different Exploration text. Its older prelims list is not treated as proof of a current syllabus.