Free NCERT/CBSE Learning Resources - Class 6-12 Video Lectures + Notes - Hindi, English, Hinglish
म NCERT/CBSE aligned study material
Class 6-12 • Free forever

Home / Class 10 / Science / Chapter 11

Electricity

विद्युत

Electric current, potential difference, Ohm's law, resistance, series and parallel circuits, heating effect of current, electric power aur energy

Long + Short notes Hindi • English • Hinglish NCERT Class X Science, chapter file jesc111 (Reprint 2025-26)

Interactive Visual Walkthrough

8 interactive scenes + quiz on Electricity. Edition: NCERT Class X Science, chapter file jesc111 (Reprint 2025-26).

Walkthrough Kholo →

Long Notes - Full Explanation

Concept pakka karne ke liye - aaram se padho

Notes language:

1️⃣ Electric Current, Circuit aur Potential Difference ⭐⭐⭐

  • Electric current ka continuous aur closed path electric circuit kehlata hai. Circuit kahin se toot jaye (ya switch off ho) to current ruk jata hai aur bulb nahi jalta.
  • Electric current = kisi cross-section se unit time mein bahne wala charge: I = Q/t. Metallic wire mein electrons charge le jaate hain, par convention se current ki direction electrons ke flow se ulti maani jaati hai.
  • Charge ka SI unit coulomb (C) hai, jo lagbhag 6 × 1018 electrons ke charge ke barabar hai (ek electron par 1.6 × 10-19 C). Current ka SI unit ampere (A): 1 A = 1 C/1 s. 1 mA = 10-3 A, 1 µA = 10-6 A. Ammeter current naapta hai aur hamesha series mein lagta hai.
  • Charge tabhi behta hai jab potential difference ho; cell ke andar chemical action ise banata hai. V = W/Q; 1 volt = 1 joule per coulomb. Voltmeter potential difference naapta hai aur hamesha parallel mein lagta hai.
  • Example 11.1: I = 0.5 A, t = 10 min = 600 s, to Q = It = 300 C. Example 11.2: W = VQ = 12 V × 2 C = 24 J.

💡 I = Q/t, V = W/Q. Ammeter series mein, voltmeter parallel mein.

2️⃣ Ohm's Law ⭐⭐⭐

  • Ek given metallic wire ke ends ke beech potential difference V, usme bahne wale current I ke directly proportional hota hai, jab tak uska temperature same rahe. Yehi Ohm's law hai: V ∝ I, yani V = IR. Georg Simon Ohm ne ise 1827 mein khoja.
  • R wire ka resistance hai: conductor ki wo property jo charge ke flow ka virodh karti hai. SI unit ohm (Ω). R = V/I, aur 1 Ω = 1 V / 1 A.
  • V-I graph ek straight line hoti hai jo origin se guzarti hai, kyunki V/I constant ratio hai.
  • I = V/R se current resistance ke inversely proportional hai: resistance double to current aadha. Current badalne ke liye rheostat (variable resistance) use hota hai, bina voltage source badle.
  • Example 11.3: 220 V par bulb (R = 1200 Ω) ka I = 0.18 A; heater coil (R = 100 Ω) ka I = 2.2 A. Example 11.4: R = 60/4 = 15 Ω, 120 V par I = 120/15 = 8 A.

💡 V = IR; V-I graph origin se straight line.

3️⃣ Resistance kin Factors par Depend Karta Hai ⭐⭐⭐

  • Conductor ka resistance (i) uski length, (ii) area of cross-section aur (iii) material ki nature par depend karta hai. Wire ki length double karne par ammeter reading aadhi ho jaati hai.
  • R ∝ l aur R ∝ 1/A, isliye R = ρl/A. ρ (rho) electrical resistivity hai, material ki characteristic property. SI unit Ω m.
  • Metals aur alloys ki resistivity bahut kam hoti hai (10-8 se 10-6 Ω m): ye achhe conductors hain. Rubber aur glass jaise insulators ki resistivity 1012 se 1017 Ω m ke order mein hoti hai. Resistance aur resistivity dono temperature ke saath badalte hain.
  • Alloy ki resistivity usse bane pure metals se aam taur par zyada hoti hai aur alloys high temperature par jaldi oxidise nahi hote, isliye heating devices (iron, toaster) mein alloy use hote hain. Bulb filament ke liye tungsten; transmission lines ke liye copper aur aluminium.
  • Example 11.5: R = 26 Ω, d = 0.3 mm, l = 1 m: ρ = Rπd²/4l = 1.84 × 10-6 Ω m, jo Table 11.2 ke anusar manganese hai. Example 11.6: l/2 aur 2A wale wire ka R = 4/4 = 1 Ω.

💡 R = ρl/A. Alloy: high resistivity; tungsten: filament.

4️⃣ Resistors in Series ⭐⭐⭐

  • Series mein resistors end-to-end jude hote hain. Har resistor mein same current I bahta hai, ammeter kahin bhi lagao reading same.
  • Total potential difference V = V1 + V2 + V3. Ohm's law lagane par Rs = R1 + R2 + R3: equivalent resistance har individual resistance se zyada hota hai.
  • Example 11.7: lamp 20 Ω aur conductor 4 Ω, 6 V battery ke saath series mein: Rs = 24 Ω, I = 6/24 = 0.25 A, lamp par V = 5 V, conductor par 1 V.
  • Series ke disadvantages: bulb aur heater ko series mein nahi jod sakte kyunki unhe alag-alag current chahiye; ek component fail ho to poora circuit toot jata hai (fairy lights ka example).

💡 Series: same current, voltages add, Rs = R1 + R2 + R3.

5️⃣ Resistors in Parallel ⭐⭐⭐

  • Parallel mein resistors X aur Y points ke beech jude hote hain. Har resistor par same potential difference V hota hai.
  • Total current I = I1 + I2 + I3. Ohm's law se 1/Rp = 1/R1 + 1/R2 + 1/R3: reciprocal of equivalent resistance, individual reciprocals ka sum.
  • Example 11.8: 5 Ω, 10 Ω, 30 Ω aur 12 V battery: currents 2.4 A, 1.2 A, 0.4 A; total 4 A; Rp = 3 Ω.
  • Example 11.9 (series-parallel): R′ = 8 Ω (10 Ω aur 40 Ω parallel), R″ = 10 Ω (30, 20, 60 Ω parallel); total R = 18 Ω, I = 12/18 = 0.67 A.
  • Parallel circuit current ko gadgets mein baant deta hai aur total resistance kam karta hai; ye tab helpful hai jab har gadget ko alag current chahiye.

💡 Parallel: same voltage, currents add, reciprocals add.

6️⃣ Heating Effect of Electric Current ⭐⭐⭐

  • Purely resistive circuit mein source ki energy poori tarah heat ban jaati hai: ise heating effect of electric current kehte hain. Isi par electric heater aur iron kaam karte hain.
  • Power input P = VI. Time t mein produce hui heat H = VIt. Ohm's law lagane par H = I²Rt: Joule's law of heating.
  • Heat (i) current ke square ke, (ii) resistance ke aur (iii) time ke directly proportional hoti hai.
  • Applications: electric iron, toaster, oven, kettle, heater. Bulb filament tungsten (melting point 3380 °C) ka hota hai aur bulbs mein chemically inactive nitrogen aur argon bhari jaati hai. Fuse circuit mein series mein lagta hai: zyada current par fuse wire pighalkar circuit tod deta hai. Domestic fuse ratings 1 A, 2 A, 3 A, 5 A, 10 A, aur 1 kW iron (220 V) ke liye 4.54 A current, isliye 5 A fuse.
  • Example 11.10: 840 W iron: I = 3.82 A, R = 57.60 Ω; 360 W: I = 1.64 A, R = 134.15 Ω. Example 11.11: H = 100 J/s, R = 4 Ω: I = 5 A, V = 20 V.

💡 H = I²Rt; fuse series mein; filament tungsten.

7️⃣ Electric Power aur Energy ⭐⭐⭐

  • Power ka matlab energy consume hone ki rate: P = VI = I²R = V²/R. SI unit watt (W): 1 W = 1 V × 1 A. 1 kilowatt = 1000 W.
  • Electrical energy = power × time. Unit watt hour (W h); commercial unit kilowatt hour (kW h), jise aam bhasha mein unit kehte hain. 1 kW h = 3.6 × 106 J.
  • Electrons consume nahi hote. Hum electricity board ko energy ke liye pay karte hain jo electrons ko gadgets mein chalati hai.
  • Example 11.12: 220 V, 0.50 A: P = 110 W. Example 11.13: 400 W fridge, 8 h/day, 30 din: 96000 W h = 96 kW h; Rs 3.00 per kW h par cost Rs 288.00.

💡 P = VI; 1 kW h = 3.6 × 106 J.

Short Notes - Quick Revision

Exam se pehle sirf yeh dohrao

Notes language:

Current aur PD

  • I = Q/t; 1 A = 1 C/s
  • V = W/Q; 1 V = 1 J/C
  • Ammeter series, voltmeter parallel
  • Current: electrons ke ulti direction

Ohm's Law

  • V = IR
  • V-I graph origin se straight line
  • Unit of R: ohm
  • Rheostat current badalta hai

Resistance

  • R = ρl/A
  • Unit of ρ: Ω m
  • Alloy: high resistivity
  • Tungsten filament; Cu, Al lines

Series

  • Same current
  • V = V1 + V2 + V3
  • Rs = R1 + R2 + R3
  • Ek fail to sab band

Parallel

  • Same voltage
  • I = I1 + I2 + I3
  • 1/Rp = 1/R1 + 1/R2 + 1/R3
  • Rp sabse chhote R se kam

Heating

  • H = I²Rt
  • Joule's law
  • Fuse series mein
  • Filament: tungsten

Power aur Energy

  • P = VI = I²R = V²/R
  • 1 kW h = 3.6 × 10⁶ J
  • Unit: kilowatt hour
  • Energy ke liye pay karte hain

Practice - 40 Questions

Pehle khud solve karo, phir answer dekho.

Q1 Electric circuit ka kya matlab hai? (NCERT 11.1 Q1)
Answer dekho

Electric current ka continuous aur closed path. Circuit kahin toot jaye to current ruk jata hai.

Q2 Current ka unit define karo. (NCERT 11.1 Q2)
Answer dekho

SI unit ampere (A): ek ampere = ek coulomb charge per second, 1 A = 1 C/1 s.

Q3 Ek coulomb charge mein kitne electrons hote hain? (NCERT 11.1 Q3)
Answer dekho

Ek electron par 1.6 × 10-19 C. Electrons = 1 / (1.6 × 10-19) = 6.25 × 1018, yani lagbhag 6 × 1018.

Q4 Conductor ke across potential difference banaye rakhne wali device ka naam batao. (NCERT 11.2 Q1)
Answer dekho

Cell ya battery: chemical action se potential difference generate karti hai.

Q5 Do points ke beech potential difference 1 V hone ka matlab? (NCERT 11.2 Q2)
Answer dekho

Current carrying conductor mein 1 coulomb charge ek point se doosre tak le jaane mein 1 joule work hota hai.

Q6 6 V battery se guzarne wale har coulomb ko kitni energy milti hai? (NCERT 11.2 Q3)
Answer dekho

W = VQ = 6 V × 1 C = 6 J.

Q7 Conductor ka resistance kin factors par depend karta hai? (NCERT 11.5 Q1)
Answer dekho

(i) length, (ii) area of cross-section, (iii) material ki nature; temperature ke saath bhi badalta hai.

Q8 Same source se jodne par current thick wire mein zyada easily bahega ya thin wire mein? Kyon? (NCERT 11.5 Q2)
Answer dekho

Thick wire mein. R ∝ 1/A, isliye bade cross-section par resistance kam hota hai aur I = V/R se current zyada.

Q9 Component ka resistance constant ho aur potential difference aadha ho jaye to current mein kya change? (NCERT 11.5 Q3)
Answer dekho

I = V/R, isliye current bhi aadha ho jata hai.

Q10 Toaster aur iron ke coils alloy ke kyon bane hote hain? (NCERT 11.5 Q4)
Answer dekho

Alloy ki resistivity pure metal se zyada hoti hai aur alloys high temperature par jaldi oxidise nahi hote.

Q11 Table 11.2 se: (a) iron aur mercury mein better conductor? (b) sabse achha conductor? (NCERT 11.5 Q5)
Answer dekho

(a) Iron (resistivity 10.0 × 10-8 Ω m, mercury ki 94.0 × 10-8 Ω m se kam). (b) Silver (1.60 × 10-8 Ω m, sabse kam).

Q12 2 V ke teen cells ki battery, 5 Ω, 8 Ω, 12 Ω resistors series mein: ammeter aur 12 Ω par voltmeter ki readings? (NCERT 11.6 Q1-2)
Answer dekho

V = 3 × 2 = 6 V, Rs = 5 + 8 + 12 = 25 Ω. Ammeter: I = 6/25 = 0.24 A. Voltmeter (12 Ω par): V = 0.24 × 12 = 2.88 V. (Circuit diagram yahan draw nahi kiya gaya.)

Q13 Parallel mein equivalent resistance judge karo: (a) 1 Ω aur 106 Ω, (b) 1 Ω, 103 Ω aur 106 Ω. (NCERT 11.6.2 Q1)
Answer dekho

Parallel combination ka resistance sabse chhote resistance se kam hota hai. (a) 1/Rp = 1 + 10-6, Rp = 0.999999 Ω, yani lagbhag 1 Ω se thoda kam. (b) 1/Rp = 1 + 10-3 + 10-6, Rp = 0.999 Ω, yani lagbhag 1 Ω se thoda kam.

Q14 100 Ω lamp, 50 Ω toaster, 500 Ω water filter 220 V par parallel. Iron ka resistance jo itna hi current le, aur uska current? (NCERT 11.6.2 Q2)
Answer dekho

Currents: 220/100 = 2.2 A, 220/50 = 4.4 A, 220/500 = 0.44 A; total = 7.04 A. Iron ka current 7.04 A, resistance R = 220/7.04 = 31.25 Ω.

Q15 Devices ko battery ke parallel jodne ke advantages series ke comparison mein? (NCERT 11.6.2 Q3)
Answer dekho

Parallel mein current gadgets mein baat jata hai aur total resistance kam hota hai, har gadget ko apna alag current mil sakta hai, aur ek gadget fail ho to baaki chalte rehte hain. Series mein ek fail ho to poora circuit toot jata hai.

Q16 2 Ω, 3 Ω, 6 Ω ko kaise jodein ki total (a) 4 Ω, (b) 1 Ω mile? (NCERT 11.6.2 Q4)
Answer dekho

(a) 3 Ω aur 6 Ω parallel (= 2 Ω), usse 2 Ω series mein: 2 + 2 = 4 Ω. (b) Teeno parallel: 1/Rp = 1/2 + 1/3 + 1/6 = 1, Rp = 1 Ω.

Q17 4 Ω, 8 Ω, 12 Ω, 24 Ω ke chaar coils se (a) highest (b) lowest total resistance? (NCERT 11.6.2 Q5)
Answer dekho

(a) Series: 4 + 8 + 12 + 24 = 48 Ω. (b) Parallel: 1/Rp = 1/4 + 1/8 + 1/12 + 1/24 = 12/24, Rp = 2 Ω.

Q18 Electric heater ki cord kyon nahi chamakti jabki heating element chamakta hai? (NCERT 11.7.1 Q1)
Answer dekho

Cord aur element mein same current hai, par H = I²Rt hai. Cord ka resistance bahut kam hai, isliye uska heating bahut kam hota hai, jabki element ka resistance high hone se wo bahut garam hokar chamakta hai (supported explanation).

Q19 1 ghante mein 50 V potential difference se 96000 coulomb charge guzarne par heat? (NCERT 11.7.1 Q2)
Answer dekho

H = VQ = 50 V × 96000 C = 4.8 × 106 J.

Q20 20 Ω resistance ki iron 5 A current leti hai. 30 s mein heat? (NCERT 11.7.1 Q3)
Answer dekho

H = I²Rt = 5² × 20 × 30 = 15000 J (1.5 × 104 J).

Q21 Current dwara energy deliver hone ki rate kya determine karta hai? (NCERT 11.8 Q1)
Answer dekho

Electric power: P = VI = I²R = V²/R.

Q22 Electric motor 220 V line se 5 A leta hai. Power aur 2 h mein energy? (NCERT 11.8 Q2)
Answer dekho

P = VI = 220 × 5 = 1100 W. Energy = 1100 W × 2 h = 2200 W h = 2.2 kW h (= 7.92 × 106 J).

Q23 Resistance R ke wire ko 5 barabar parts mein kaata aur parallel joda. R/R′ = ? (NCERT Exercise 1)
Answer dekho

(d) 25. Har part R/5; parallel mein 1/R′ = 5 × 5/R = 25/R, R′ = R/25.

Q24 Kaun sa term circuit mein electrical power nahi hai? (NCERT Exercise 2)
Answer dekho

(b) IR². Power I²R, VI aur V²/R hoti hai.

Q25 220 V, 100 W bulb ko 110 V par chalane par power? (NCERT Exercise 3)
Answer dekho

R = V²/P = 220²/100 = 484 Ω. P = 110²/484 = 25 W, option (d).

Q26 Same material, length, diameter ke do wires series aur phir parallel mein same PD par. Heat ka ratio (series : parallel)? (NCERT Exercise 4)
Answer dekho

Har wire R: Rs = 2R, Rp = R/2. H = V²t/R, isliye Hs : Hp = (1/2R) : (2/R) = 1 : 4, option (c).

Q27 Voltmeter ko do points ke beech PD naapne ke liye kaise jodte hain? (NCERT Exercise 5)
Answer dekho

Voltmeter hamesha un do points ke parallel mein jodte hain.

Q28 Copper wire: d = 0.5 mm, ρ = 1.6 × 10-8 Ω m. R = 10 Ω ke liye length? Diameter double karne par resistance kitna badlega? (NCERT Exercise 6)
Answer dekho

R = ρl/A, A = πd²/4 = 1.96 × 10-7 m². l = RA/ρ = 122.7 m (lagbhag 123 m). Diameter double karne par A chaar guna, R = 10/4 = 2.5 Ω, yani resistance 7.5 Ω kam (chaar guna kam) ho jata hai.

Q29 I = 0.5, 1.0, 2.0, 3.0, 4.0 A par V = 1.6, 3.4, 6.7, 10.2, 13.2 V. Graph aur resistance? (NCERT Exercise 7)
Answer dekho

V/I = 3.2, 3.4, 3.35, 3.4, 3.3 Ω, average lagbhag 3.3 Ω; V-I graph (best-fit slope) bhi lagbhag 3.3 Ω. (Graph yahan draw nahi kiya gaya.)

Q30 12 V battery ke across resistor mein 2.5 mA current. Resistance? (NCERT Exercise 8)
Answer dekho

R = V/I = 12 / (2.5 × 10-3) = 4800 Ω (4.8 kΩ).

Q31 9 V battery series mein 0.2, 0.3, 0.4, 0.5, 12 Ω ke saath. 12 Ω se kitna current? (NCERT Exercise 9)
Answer dekho

Rs = 13.4 Ω. I = 9/13.4 = 0.67 A; series mein har resistor se same current.

Q32 220 V line par 5 A carry karne ke liye 176 Ω ke kitne resistors parallel mein chahiye? (NCERT Exercise 10)
Answer dekho

Total R = 220/5 = 44 Ω. n resistors ke liye 176/n = 44, to n = 4.

Q33 Teen 6 Ω resistors ko kaise jodein ki combination (i) 9 Ω, (ii) 4 Ω ho? (NCERT Exercise 11)
Answer dekho

(i) Do 6 Ω parallel (= 3 Ω), unke saath teesra 6 Ω series mein: 3 + 6 = 9 Ω. (ii) Do 6 Ω series (= 12 Ω), uske parallel teesra 6 Ω: 12 × 6/18 = 4 Ω.

Q34 220 V line par 10 W ke bulbs; maximum allowable current 5 A. Kitne lamps parallel mein? (NCERT Exercise 12)
Answer dekho

Har bulb ka current = 10/220 = 1/22 A. n = 5 / (1/22) = 110 lamps.

Q35 Hot plate: 220 V line, coils A aur B har ek 24 Ω. Alag, series aur parallel mein currents? (NCERT Exercise 13)
Answer dekho

Ek coil akela: 220/24 = 9.17 A. Series: R = 48 Ω, I = 4.58 A. Parallel: R = 12 Ω, I = 18.33 A.

Q36 2 Ω resistor mein power compare karo: (i) 6 V battery series mein 1 Ω aur 2 Ω; (ii) 4 V battery parallel mein 12 Ω aur 2 Ω. (NCERT Exercise 14)
Answer dekho

(i) I = 6/3 = 2 A, P = I²R = 4 × 2 = 8 W. (ii) 2 Ω par poora 4 V: P = V²/R = 16/2 = 8 W. Dono mein power barabar (ratio 1 : 1).

Q37 100 W aur 60 W (dono 220 V) lamps parallel mein 220 V mains par. Line se kitna current? (NCERT Exercise 15)
Answer dekho

Total power 160 W, I = P/V = 160/220 = 0.73 A (0.727 A).

Q38 250 W TV 1 hr mein ya 1200 W toaster 10 min mein, kaun zyada energy use karta hai? (NCERT Exercise 16)
Answer dekho

TV: 250 W × 1 h = 250 W h. Toaster: 1200 W × (10/60) h = 200 W h. TV zyada energy use karta hai.

Q39 44 Ω heater 2 ghante tak 5 A leta hai. Heat develop hone ki rate? (NCERT Exercise 17)
Answer dekho

P = I²R = 25 × 44 = 1100 W, yani 1100 J per second.

Q40 Explain: (a) tungsten filament mein kyon? (b) heating devices ke conductors alloy ke kyon? (c) domestic circuits mein series kyon nahi? (d) wire ka resistance cross-section area se kaise vary? (e) transmission ke liye copper aur aluminium kyon? (NCERT Exercise 18)
Answer dekho

(a) Tungsten ka high melting point 3380 °C hai, wo bahut garam hokar bhi pighalta nahi, isliye filament ke liye theek hai. (b) Alloy ki resistivity zyada hoti hai aur wo high temperature par jaldi oxidise nahi hota. (c) Series mein sab ko same current milta hai jabki devices ko alag current chahiye, aur ek fail ho to poora circuit toot jata hai. (d) R ∝ 1/A: area badhne par resistance kam hota hai, area aadha to resistance double. (e) Inki resistivity bahut kam hai (Table 11.2: Cu 1.62 × 10-8, Al 2.63 × 10-8 Ω m), isliye transmission mein kam loss (supported explanation).

Agla chapter: Chapter 12 Magnetic Effects of Electric Current